CTM 25-10 has 0.55 kW motor, maximum capacity of 10 m3/h and maximum head 13.5 m. Available in PP and PVDF.
SPECIFICATIONS CTM 25-10
Data
| Dimensions | mm/inch |
| Height A | 100 / 3.94 |
| Length B |
334.5 / 13.17 |
| Height C |
71 / 2.80 |
| Depth D |
141 / 5.55 |
| Materials | |
| Pump casing and isolation shell (rear casing) | PP-GF (30%) or PVDF |
| Impeller | PP or PVDF |
| Lantern (not wetted) | PP-GF (30%) |
| Static bushings | Ceramic (standard) or SiC |
| Rotating bushings | PTFE-graphite (standard) or SiC |
| O-rings | FKM, EPDM, FFKM, FEP/Silicone |
| Magnets | NdFeB |
| General characteristics | |
| Temperature range | PP pumps: 0C .... +70C |
| PVDF pumps: 0C .... +90C | |
| System pressure rating | PP pumps: PN6 at 20C, PN2 at 70C |
| PVDF pumps: PN6 at 20C, PN2 at 90C | |
| Viscosity | 200 cSt max |
| Solids | 2% max concentration by weight |
| Hardness 800 Vk / size 150 mm | |
| Motor | IEC standard, 3-phase |
| 0.55 kW/2900 rpm, IP 55, frame IEC B3/B14 |
Performance curve
The performance curves are based on water at 20°C. Other circumstances might change the performance.
